by Kevin Thompson
So where we left off with windows roof lining fitted the wiring the wheels running gear electric's sorted then came some wood work in the rear of the reliant.
As I was not going to be putting the rear seat's back I though I would lift up the back section a couple of inches so I could fit most of the rear electric's in and fit some box's in too ( did I mention electric's again ? ) sigh yes I added some more complicated wiring
More on that later so did this to the back end of the reliant the first picture show's as it was before I cut out a section next was a big hole cut out as you can see in the next picture it is a big hole but I filled it in with a box I made too on both side's as in the third picture and the forth picture the other side was smaller due the spare wheel being in the way and the was no where for it to go so next in the firth picture went in the frame work for the are to carry spares ect same with the boxes I fitted too they will have door's fitted to them in the sixth picture you see I fitted a back board the go's behind the front seat's that was carpeted later
The frame was going ok till I ran out off timber so off I went to local timber stores for more wood and screws and nail's tell you truth I never used the nail's really as used mostly wood screw's and glue was high as a kite with evo-stick glue ( but it dam nice enough of that back to what you was doing ) oh sorry yes where was I ? WELL have to wait for part 11
Filter by Author
Filter by Month